|
|
Extended Warranties
are now available check our store
for details
 |
|
|
|
Visit our on-line
Store
 |
|
|
|
ISO 9000: 2000
Certified |
|
|
|
Application questions?
contact us by phone, fax or e-mail. |
|
|
|
Warranty Registration
On-line form
|
| | | | | MicroVibe P Pocket PC-based FFT Vibration Analyzer Specifications |  | | Vibration Analysis in the Palm of Your Hand | | . | |  FEATURES SPECIFICATIONS ORDERING INFORMATION | | | | MicroVibe P (CMVL3850) | Minimum PDA Requirements:
Operating System:
Processor:
Interface:
Recommended Specifications:
Memory (RAM):
Interface with Pocket PC:
Power Supply:
| Conforms to the Pocket PC Specifications
Microsoft Pocket PC 2003 (Windows Mobile 3.0)
ARM Processor
Compact Flash TYPE II Slot 3.3 V only
Processor: PXA255 400 MHz or higher
64 MB or higher
Compact Flash TYPE II, Slot 3.3 V only
+3.3 V (Supplied by Pocket PC)
Current: Standby: 44 µ A
Under Measurement: 48 mA | Pickup Input (PU IN)
AC Voltage Signal:
Input Terminal: |
Maximum +/- 2.5 V
8-pin modular jack (RJ-45) (ICP type pre-amp built-in accelerometer is not connected. | Raw Waveform Output (PU OUT)
AC Voltage Signal: Maximum
Output Terminal: |
+/- 2.5 V
Mini-jack (2.5 mm) | | Sampling Frequency: | Max. 76.8 kHz (Changes according to Mode) 76.8 kHz/38.4 kHz | | Aliasing Filter: | 20 kHz/2 kHz (Changes according to Mode and Sampling Frequency) | | A/D | 16-Bit | | Temperature Range: | 0 to +45°C (+32°F to +113°F) | | Humidity Range: | <90% relative humidity, non-condensing | | Weight: | 25 g (0.88 oz) approximate (Card only) | | Dimensions: | 60.0 mm x 42.1 mm x 16.9 mm (2.36” x 1.66” x 0.67”) | | Shape: | Conforms to CF Card TYPE II, Card Type. |
| MEASUREMENT SPECIFICATIONS (For Measurement with CMSS 3811 Accelerometer) | | Frequency Range | | A | Acceleration: | 10~15 kHz (*1) | | V | Velocity: | 10~1000 Hz | | D | Displacement: | 10~150 Hz | | E1 | Envelope Detection: | 5~100 Hz | | E2 | Envelope Detection: | 50~1 kHz | | E3 | Envelope Detection: | 500~10 kHz | | E4 | Envelope Detection: | 5 k~20 kHz | | Sampling Frequency | A, E3, E4: | 76.8 kHz | | | E1, E2, V, D: | 38.4 kHz | | Aliasing Filter | A, E3, E4: | 20 kHz | | | E1, E2, V, D: | 2 kHz | | Range | | A, E1, E2, E3, E4 | 0~1G: | (x100 range) | | | 0~5G: | (x20 range) | | | 0~20G: | (x5 range) | | | 0~100G: | (x1 range) | | V | 0~10 mm/s: | (x100 range) | | | 0~50 mm/s: | (x20 range) | | | 0~200 mm/s: | (x5 range) | | | 0~1000 mm/s: | (x1 range) | D | 0~50 m | (x100 range) | | | 0~250 m: | (x20 range) | | | 0~1000 m: | (x5 range) | | | 0~5000 m | (x1 range) | (*1) The upper bound frequency can be changed by Utility Menu’s A Filter. |
 Complete Specifications are available on the Data Sheet
| |
|
