|
|
Extended Warranties
are now available check our store
for details
 |
|
|
|
Visit our on-line
Store
 |
|
|
|
ISO 9000: 2000
Certified |
|
|
|
Application questions?
contact us by phone, fax or e-mail. |
|
|
|
Warranty Registration
On-line form
|
| |
| | X-Strobe Fiber Optic Stroboscopes |  |
X-Strobe pictured with optional nosepiece and
fiber optic bundle. |
The X-Strobe Series is an advanced machine vision illumination strobe system. It's high output, long life, small size and superior reliability combine to make the X-Series the most versatile fiber optic stroboscopes available. These products incorporate the latest innovations in Xenon flashlamp technology, Power supply engineering, trigger performance and reflector design while meeting CE requirements.
 PRICE SUBJECT TO CHANGE WITHOUT NOTICE. |
|
| The Xenon Flashlamp produces intense pulses of radiant energy covering the ultraviolet (UV), visible (VIS) and near infrared (NIR). When coupled to a CCD/CID camera system, the strobe "freezes motion" which eliminates blur and enhances image quality. Several variations of the X-Strobe Series are available; each optimized for maximum light output at a specific flash rate. External signal inputs allow you to further customize the stroboscope to your unique application.
 |
Re-designed interior offers advanced
xenon lamp and power management systems
 Download a Data Sheet
|
|
Features |
-
High intensity bright white light
-
Small overall size
-
Long Life Flash lamp
-
Improved flash stability
-
Universal AC input (100-240 VAC)
-
CE designed
-
Inputs for external trigger and intensity control
-
Easy lamp replacement
|
 The X-Series is designed to the latest European CE directives for Safety and Emission. The universal AC power supply recognizes AC voltages from 100V to 240V with line frequencies from 50 - 60 Hz. The design of the xenon flashlamp assembly provides quick and easy lamp replacement. Various nosepieces and adapters are available for sizes up to 1" in diameter. |
Optical Specifications (1) |
|
|
| Model |
X-1200 |
X-400 |
Maximum flash rate (2) |
20 Hz (0 to 45 Hz) |
60 Hz (0 to 135Hz) |
Input energy per flash (3) |
1.0 to 2.2 J |
0.3 to 0.7 J |
Light output flash duration (4) |
8 to 10 µsec |
2 to 10 µsec |
Photometric light output (5) |
31 lumen-sec |
12 lumen-sec |
(6) |
19 lumen-sec |
8.5 lumen-sec |
(7) |
8.5 lumen-sec |
4.2 lumen-sec |
Radiometric light output (5) |
225 mJ |
90 mJ |
(6) |
145 mJ |
60 mJ |
(7) |
65 mJ |
30 mJ |
| Spectral bandwidth |
250 - 1100 + nm |
Flashlamp life (8) |
>108 |
> 2 x 108 |
Discharge Capacitance |
12 µf |
4 µf |
Electrical Specifications |
| Input voltage |
100 - 240 Vac (± 10 %), 50 - 60 Hz |
| Maximum output power |
43 W |
| Input current (rms) |
1.5 A @ 115 Vac |
| Flashlamp voltage (9) |
400 - 600 Vdc adjustable |
| Remote intensity control |
4 - 6 Vdc (Vref: Vlamp = 1 : 100) |
| External trigger input (10) |
+5 V TTL pulse, 20 mA, 10-100 µsec |
| Environmental Specifications |
| Operating temperature |
32 to +104ºF (0 to +40ºC) |
| Storage temperature |
-40 to +194ºF (-40 to + 90ºC) |
|
Notes: All values are nominal; specifications subject to change without notice. - Maximum flash rate at 600 Vdc; the numbers in parenthesis represent the range of flash rates at adjusted lamp voltage (400 - 600 Vdc). Flash rate = (E = ½ CV2).
- Energy at 400-600 Vdc
- Approximate values measured at 1/3 peak of light pulse.
- Approximate light output at 600 VDC into 0.9" (23 mm) diameter fiber optic light guide. Numerical aperture 0.5
- Approximate light output at 600 VDC into 0.5" (13 mm) fiber optic light guide.
- Approximate light output at 600 VDC into 0.27" (7 mm) fiber optic light guide.
- Maintaining >50% light output.
- Increasing lamp voltage will decrease lamp service life.
- Delay between flash command and light output is 8 µsec typical.
- Optional fiber optic nosepieces: Fostec 0.72" ID (MVS-23), Volpi 0.59" ID (MVS-24), or Dolan Jenner 1.0" ID (MVS-25).
|
Mechanical Specifications click image for larger view
specifications subject to change without notice.
 |
 |
|
|
